Technical Specifications

This is the hardware we use for all NoiseFinder products.

Lap top requirements

PC with a Pentium III grade processor running at no less than 500 MHz with 64 MB RAM and full duplex 16 bit soundcard.
WindowsXP or Vista. ( Most Laptops built after 2005 are 1,000mhz plus and have 500mb plus of ram )

Spectrum analyser software

• 1/24 Octave detection capability
• 20 memory files
• 50-20,000 Hz response
• Responses to frequencies are accurate to
  within 0.5db -0-160db response

Hardware

• USB Codex audio Interface Plug and play
  Directional /Omni microphone Switchable
• 50-20,000 Hz Response
• Measures up to 130 db
• Sensitivity range .5 Db @ 90 DB
  and 1HZ
  

Behringer UCA202 Ultra low-latency 2 In/2 Out USB/Audio Interface with Digital Output
Hosa CPR-410G RCA — DUAL ¼, 10 ft.
Hosa CPR-420G RCA — DUAL ¼, 20 ft.